Spent last 7 days assessing 25 different ERPs. Selected WebERP, so am determined to make this work.
Come across issue with serialised products. Can't seem to find help via search. Most likely my fault, so happy to take advice on board.
In the test system ...
1. Receive serialised product 'x' from WO to Stock Location 'Portacabin1'; serial number 00000005.
2. Intended to test removing the stock using Stock Adjustment, but instead I erroneously added another 'x' to stock using the same serial number 00000005 (which the system allowed).
3. Stock is therefore 2, but I assume that I only have one serial number.
Question 1: Should we able to add duplicate serial numbers?
... so to fix my error ...
I tried to fix it with a Stock Adjustment of 2 from Stock Location 'Portacabin1' to remove all stock. But when I select the part and stock location 'Portacabin1' there is a warning message 'There does not appear to be any 'x' left in MEL'. MEL most likely relates to Stock Location 'Melborne'. I get the same 'MEL' message regardless of which Stock Location is selected at the entry screen.
Question 2: Why can't I see the serial numbers in Stock Location 'Portacabin1' in this screen?
Attached picture of screens and table stockserialitems
