webERP Forum
security settings for admin bad - Printable Version

+- webERP Forum (http://www.weberp.org/forum)
+-- Forum: webERP Discussion (/forumdisplay.php?fid=1)
+--- Forum: Problems / Bugs? (/forumdisplay.php?fid=8)
+--- Thread: security settings for admin bad (/showthread.php?tid=2669)



security settings for admin bad - opto - 01-03-2016 03:28 AM

just downloaded most recent version ...

in the demo compny, admin is not allowed to enter WO's. What to do?

(Your security settings do not allow you to create or update new Work Order at this location MEL)

best regards,

Klaus


RE: security settings for admin bad - falkoner - 01-03-2016 07:15 AM

Hi Klaus, I suspect this is to do with the user not having permissions on that location. Look for "User Authorised Inventory Locations Maintenance" under setup and give the admin user rights to Location MEL.

Thanks
Tim


RE: security settings for admin bad - opto - 01-03-2016 08:48 AM

Thanks Tim, that did it.
Shouldn't that be set in the demo company? Why wouldn't admin not have full rights?

Klaus


RE: security settings for admin bad - falkoner - 01-03-2016 07:09 PM

Yes you are right it should be


RE: security settings for admin bad - opto - 01-03-2016 10:42 PM

it seems something with the demo company setup went wrong.

I have the locations, but no vendors or items. I will reinstall and see what happens then.